No products
Pedrollo Top Floor submersible Drainage pump
View larger
Model TOP FLOOR By Pedrollo
The Pedrollo Top Floor series submersible Drainage pump is suitable for use with clear water that does not contain abrasive particles. The pump has the ability to drain water to a level of .19" (2 millimetres) above ground level, they are suitable for use in domestic emergencies where a small area must be drained to the lowest level possible.
Typically ships within 1 to 2 business days
The pump has the ability to drain water to a level of .19" (2 millimetres) above ground level, they are suitable for use in domestic emergencies where a small area must be drained to the lowest level possible.
| Flow Rate | up to 160 l/min (9,6 m³/h) |
| Head Up | to 9 m |
| Liquid Temperature | up to 104 °F (+40 °C) |
| Construction and Safety Standards | EN 60335-1 EN 60034-1 IEC 60335-1 IEC 60034-1 CEI 61-150 CEI 2-3 |
| Certifications | ISO 9001: QUALITY ISO 14001: ENVIRONMENT |
| Guarantee | 2 years |
| Pump Body | Technopolymer |
| Impeller | Noryl FE1520PW |
| Motor Shaft | Stainless steel EN 10088-3 - 1.4104 |
| Bearings | 6201 ZZ / 6201 ZZ |
| Capacitor | 220V 10 μF - 450 VL 110 V or 127 V 16 μF - 250 VL |
| Electric Motor | TOP-FLOOR: single-phase 220 V - 60 Hz with thermal overload protector incorporated into the winding |
| Pump Usage | Domestic, Clean Water |
| Suction Filter | Technopolymer |
| Suction Plate | Stainless steel AISI 304 |
| Diffuser | Technopolymer |
| Motor Casing | Stainless steel AISI 304 |
| Motor Casing Plate | Stainless steel AISI 304 |
| Handle Assembly | Complete with 5 metres long “H07 RN-F” power cable with Schuko plug |
| Hose Connector | Ø 25 mm hose connection for TOP1 - FLOOR Ø 35 mm for TOP2 - FLOOR |
 |
| Component | Construction Characteristics |
| 1 Pump Body | Technopolymer |
| 2 Suction Filter |
Technopolymer |
| 3 Suction Plate | Stainless steel AISI 304 |
| 4 Diffusers |
Technopolymer |
| 5 Impeller | Noryl FE1520PW |
| 6 Motor Casing | Stainless steel AISI 304 |
| 7 Motor Casing Plate | Stainless steel AISI 304 |
| 8 Motor Shaft | Stainless steel EN 10088-3 - 1.4104 (AISI 316L for LA versions) |
| 9 Shaft with Double Seal and Oil Chamber | Seal Model | Shaft Diameter | Stationary ring | Rotational ring | Elastomer |
| STA-12R | Ø 12 mm | Ceramic | Graphite | NBR |
| 10 Lip Seal | Ø 12 x Ø 19 x H 5 mm |
| 11 Bearings | 6201 ZZ / 6201 ZZ |
| 12 Capacitor | Pump (Single-phase) | Capacitance (220V) | Capacitance (120V or 127V) |
| TOP 1-FLOOR | 10 μF - 450 VL | 16 μF - 250 VL | |
| TOP 2-FLOOR | 10 μF - 450 VL | 16 μF - 250 VL |
| 13 Electric Motor | TOP-FLOOR: single-phase 220 V - 60 Hz with thermal overload protector incorporated into the winding. Insulation: class F Protection: IP X8 |
| 14 Handle Assembly (resin sealed) | Complete with: 5 metres long “H07 RN-F” power cable with Schuko plug |
| 15 Hose Connector with Ring Nut | Ø 25 mm hose connection for TOP1 - FLOOR Ø 35 mm for TOP2 - FLOOR |
Based on 0 reviews
(0)
(0)
(0)
(0)
(0)
Share your review on Facebook and get voucher for discount
5 $
,
valid for 365 days
